EN
During lawn maintenance, lawn mower clogging is a common issue—weeds tangling around blades or blocking the discharge chute not only interrupts work but can also damage machine components and reduce future efficiency. In fact, most clogging problems can be resolved with simple steps. Mastering these 3 methods can effectively reduce clogging and ensure stable mower operation.
First, perform “pre-treatment” before operation to reduce clogging risks. Clogs often occur when grass is excessively wet or too tall, causing it to stick after cutting. If your lawn has recently been rained on or watered, wait 1-2 days for surface moisture to evaporate before mowing to prevent wet grass from tangling with blades. If weeds are excessively tall (over 15 cm), first set the cutting height to the highest setting for an initial rough cut to reduce weed height. Then adjust to the target height for a second trim, minimizing the amount cut per pass and lowering the risk of clogging. Additionally, inspect the lawn before mowing and remove debris like stones and branches to prevent tangling with weeds and worsening clogging issues.
Second, promptly clear the blades and grass discharge channel to maintain unobstructed flow. During operation, grass clippings and debris tend to accumulate on the blades and discharge opening, requiring regular shutdowns for cleaning. It is recommended to shut off the engine every 30 minutes of operation and wait for the blades to come to a complete stop before using a stiff-bristled brush or wooden stick to remove tangled weeds from the blades. Avoid direct contact with the blades to prevent cuts. If the discharge chute becomes blocked, remove the grass bag and use a tool to clear accumulated debris from the chute to ensure smooth grass discharge. Additionally, regularly inspect blade sharpness. Dull blades compress weeds instead of cutting them, increasing entanglement risk. Sharpen or replace dull blades promptly.
Third, follow proper operating procedures to prevent grass jams caused by improper use. Maintain a consistent speed when pushing the mower. Excessive speed prevents timely cutting, causing grass to pile up beneath the blades; conversely, too slow a pace results in over-cutting, where shredded grass easily clogs the passage. Additionally, adjust the cutting direction based on lawn density. Cut along the direction of weed growth whenever possible to minimize counter-friction between weeds and blades, reducing entanglement risk. When encountering dense weed patches, use a “back-and-forth” cutting technique to avoid covering too wide an area at once. Clear weeds incrementally to lower the risk of clogging.
While grass jams are common, they can be effectively mitigated through three simple steps: “pre-treatment, frequent cleaning, and proper operation.” Paying attention to details during daily use not only reduces the hassle of grass jams but also extends the mower's lifespan, enhances lawn maintenance efficiency, and ensures smoother mowing operations.
